KRAUS #UN-ISO-62-A KICKBACK ISOLATED RISERS 12 INCH Clamp 1 1/8" BLACK

KRAUS #UN-ISO-62-A KICKBACK ISOLATED RISERS 12 INCH Clamp 1 1/8" BLACK (GENUINE)
NOTE : HATI HATI DENGAN PRODUK TIRUAN

Increase rider comfort and control with our Kickback Isolated Riser.
The Kickback moves the bars 1.5" towards the rider.
Our Kickback Isolated Riser utilizes the exact same technology as our Isolated Riser, the only difference is that the Kickback offers a one-piece kickback center section that pulls the handlebar back 1.5" toward the rider. Like the Isolated Riser, the legs are solid-mounted to the top triple tree with our supplied billet bushings and the rubber isolators have been relocated inside our billet midsection just below the bar clamp. The result is increased rider comfort and superior performance due to the more rigid, responsive setup. The proprietary use of these rubber isolators also reduces handlebar vibration and play due to less leverage being placed on the bushings.
Handlebar clamping area is 1⅛" for MX style bars or 1" for traditional OEM Harley and aftermarket bars.
Our riser is 3.5" on center for standard OEM Harley fitment.
Ships with 1 solid, billet riser bushing set.
Bottom bar clamp has an opening to accommodate hidden wiring.
Choose between a 1⅛ moto bar or traditional 1" bar. We offer a bar clamp for both.
Height is measured from the bottom of the riser to the middle of the bar clamp.
If the risers will be used with a Kraus Raptor Pullback Plate the riser hardware will come with the Raptor Plate and you will not receive Solid Bushings with your risers

Our hard-mounted risers create a super solid bar feel.
Moving the bushings up dramatically decreases vibration.
Bushing life is increased and require less maintenance.
We designed our risers to be modular, meaning you can swap out your riser legs at any point should you choose to go with something taller/shorter. No need to buy a whole new riser setup. See the Riser Legs product page for more